Embedded Flash memory (FLASH) for category 2 devices RM0440
226/2126 RM0440 Rev 4
Bits 31:17 Reserved, must be kept cleared
Bit 16 BOOT_LOCK used to force boot from user Flash area
0: Boot based on the pad/option bit configuration
1: Boot forced from Main Flash memory
Caution: If BOOT_LOCK is set in association with RDP Level 1, the debug
capabilities of the device are stopped and the reset value of the
DBG_SWEN bit of the FLASH_ACR register becomes zero. If the
DBG_SWEN bit is not set by the application code after reset, there is
no way to recover from this situation.
Bits 15:8 Reserved, must be kept cleared
Bit 7:0 SEC_SIZE1: sets the number of pages used in the Securable area.
Securable area starts at @ 0x0800 0000 and its size is SEC_SIZE1 * page size.
This field can be changed in level0 only.
Any attempt to modify in level1 silently fails, and does not change register value.
To Next Page
Loading...
Need help?
General
