ST STM32G471 User Manual

Reset and clock control (RCC) RM0440
310/2126 RM0440 Rev 4
Bit 18 DAC3EN: DAC3 clock enable
Set and cleared by software.
0: DAC3 clock disabled
1: DAC3 clock enabled
Bit 17 DAC2EN: DAC2 clock enable
Set and cleared by software.
0: DAC2 clock disabled
1: DAC2 clock enabled
Bit 16 DAC1EN: DAC1 clock enable
Set and cleared by software.
0: DAC1 clock disabled
1: DAC1 clock enabled
Bit 15 Reserved, must be kept at reset value.
Bit 14 ADC345EN: ADC345 clock enable
Set and cleared by software
0: ADC345 clock disabled
1: ADC345 clock enabled
Bit 13 ADC12EN: ADC12 clock enable
Set and cleared by software.
0: ADC12 clock disabled
1: ADC12 clock enabled
Bits 12:7 Reserved, must be kept at reset value.
Bit 6 GPIOGEN: IO port G clock enable
Set and cleared by software.
0: IO port G clock disabled
1: IO port G clock enabled
Bit 5 GPIOFEN: IO port F clock enable
Set and cleared by software.
0: IO port F clock disabled
1: IO port F clock enabled
Bit 4 GPIOEEN: IO port E clock enable
Set and cleared by software.
0: IO port E clock disabled
1: IO port E clock enabled
Bit 3 GPIODEN: IO port D clock enable
Set and cleared by software.
0: IO port D clock disabled
1: IO port D clock enabled

ST STM32G471 Specifications

General

Brand	ST
Model	STM32G471
Category	Microcontrollers
Language	English