ZyXEL Communications MSC1000G - Page 844

Chapter 30 profile Commands
Management Switch Card User’s Guide
844
set <profile> atuc [lofs
<lofs>] [loss <loss>] [lols
<lols>]
[lprs <lprs>] [ess <ess>]
[ffr <ffr>] [sesl <sesl>]
[uasl <uasl>]
[fru <fru>] [iru <iru>]
[frd <frd>] [ird <ird>]
[ift <ift>]
or
<profile> atur [lofs
<lofs>] [loss <loss>] [lprs
<lprs>]
[ess <ess>] [sesl <sesl>]
[uasl <uasl>] [fru
<fru>][iru <iru>][frd
<frd>] [ird <ird>]
Creates a profile of ADSL alarm settings. See
Section 30.6.2 on page 869 for more
information.
8
show [profile]
Lists the ADSL alarm profiles or a specific
profile’s settings.
1
alarme1 delete <profile>
Deletes an E1 alarm profile.
profile: An E1 alarm profile name, up to 31
characters.
8
map <profile>
Displays which E1 ports reference this ATM
alarm profile.
8
set <profile> [qes <qes>] [qses
<qses>] [quas <quas>]
[dayes <dayes>] dayses
<dayses>] [dayuas <dayuas>]
Creates an E1 alarm profile which includes
error (ES, SES, UAS) monitoring and alarm
reporting mechanisms.
8
show [profile]
Displays all or the specified E1 profile
settings.
1
alarmvdsl
VDSL alarm profiles allow efficient
configuration of VDSL alarm settings.
delete <profile>
Removes an unreferenced VDSL alarm
profile.
8
map <profile>
Displays which VDSL ports reference this
alarm profile.
1
set <profile>
[lofs <lofs>] [loss <loss>]
[lols <lols>] [lprs <lprs>]
[ess <ess>]
[ffr <ffr>]
[sesl <sesl>] [uasl <uasl>]
[fru <fru>]
[iru <iru>]
[frd <frd>]
[ird <ird>]
[ift <ift>]
[cv <cv>]
Creates a profile of VDSL alarm settings.
cv: The maximum number of code
violations (CRC errors).
8
show [<profile>]
Lists the VDSL alarm profiles or a specific
profile’s settings.
1
Table 366 profile Commands (continued)
COMMAND DESCRIPTION P