5-2 Bus Interface
AMD-K5 Processor Technical Reference Manual 18524C/0—Nov1996
5.1 Signal Overview
The signals on the AMD-K5 processor are compatible with the
comparable signals on the Pentium (735\90, 815\100) processor
296-pin socket. Appendix A gives a complete list of hardware
and software issues relating to this compatibility. The follow-
ing figures and tables summarize the characteristics and
behavior of the AMD-K5 processor’s signals:
■ Figure 5-1 (Signal Groups) summarizes the processor’s sig-
nals, showing the functional groups to which each signal
belongs.
■ Table 5-1 (Summary of Signal Characteristics) shows each
signal’s I/O type, when it is sampled, driven, and floated,
and its internal resistor (if any).
■ Table 5-2 on page 5-8 (Conditions for Driving and Sampling
Signals) shows the states and bus cycles during which the
processor effectively drives or samples each signal.
■ Table 5-3 on page 5-16 (Summary of Interrupts and Excep-
tions) shows the priority and characteristics of interrupts
and exceptions.
To Next Page
Loading...
