05/2014
6-52
DC SC2020
6.3.6 NVM 742_Paper Handling List
Version 1.1
General
742-219 Duplex Transport Operation Start Tim-
ing (126[mm/s]/Plain)
0 0 100 Duplex Clutch ON Timing at invert intake (126[mm/s]/Plain)
Adjusts by 1[ms/step].
OO
742-220 Duplex Transport Operation Start Tim-
ing (63[mm/s]/Heavyweight1)
0 0 200 Duplex Clutch ON Timing at invert intake (63[mm/s]/Heavyweight1)
Adjusts by 1[ms/step].
OO
742-221 Duplex Transport Operation Start Tim-
ing (126[mm/s]/Heavyweight1)
0 0 100 Duplex Clutch ON Timing at invert intake (126[mm/s]/Heavyweight1)
Adjusts by 1[ms/step].
OO
742-222 Duplex Transport Operation Pause
Timing
(2-sheet feed/126[mm/s]/Plain)(DT1)
0 -100 100 The Duplex Clutch OFF Timing for temporary stoppage at Duplex Path
(2-sheet feed/126[mm/s]/Plain)_1[ms/step] Adjustment
*Adjusting the value in the plus (+) direction delays the Duplex Clutch OFF timing.
+/-100ms Adjustment possible as 0 = 2206.
OO
742-223 Duplex Transport Operation Pause
Timing
(2-sheet feed/63[mm/s]/
Heavyweight1)(DT1)
0 -200 200 The Duplex Clutch OFF Timing for temporary stoppage at Duplex Path
(2-sheet feed/63[mm/s]/Heavyweight1)_1[ms/step]Adjustment
*Adjusting the value in the plus (+) direction delays the Duplex Clutch OFF timing.
+/-200ms Adjustment possible as 0 = 4377.
OO
742-224 Duplex Transport Operation Pause
Timing
(2-sheet feed/126[mm/s]/
Heavyweight1)(DT1)
0 -100 100 The Duplex Clutch OFF Timing for temporary stoppage at Duplex Path
(2-sheet feed/126[mm/s]/Heavyweight1)_1[ms/step]Adjustment
*Adjusting the value in the plus (+) direction delays the Duplex Clutch OFF timing.
+/-100ms Adjustment possible as 0 = 2206.
OO
742-225 Duplex Feed Operation Start Timing
(2-sheet feed/126[mm/s]/Plain)(DT2)
0 -100 100 Duplex Clutch ON timing after the temporary stoppage at Duplex Path
(2-sheet feed/126[mm/s]/Plain)_1[ms/step] Adjustment
*Adjusting the value in the plus (+) direction delays the Duplex Clutch OFF timing.
+/-100ms Adjustment possible as 0 = -870.
OO
742-226 Duplex Feed Operation Start Timing
(2-sheet feed/63[mm/s]/
Heavyweight1)(DT2)
0 -200 200 Duplex Clutch ON timing after the temporary stoppage at Duplex Path
(2-sheet feed/63[mm/s]/Heavyweight1)_1[ms/step]Adjustment
*Adjusting the value in the plus (+) direction delays the Duplex Clutch OFF timing.
+/-200ms Adjustment possible as 0 = -1807.
OO
742-227 Duplex Feed Operation Start Timing
(2-sheet feed/126[mm/s]/
Heavyweight1)(DT2)
0 -100 100 Duplex Clutch ON timing after the temporary stoppage at Duplex Path
(2-sheet feed/126[mm/s]/Heavyweight1)_1[ms/step]Adjustment
*Adjusting the value in the plus (+) direction delays the Duplex Clutch OFF timing.
+/-100ms Adjustment possible as 0 = -870.
OO
742-232 MSI Jam Clear Assist Control Feed
Time (63[mm/s])
0 -50 50 Adjusts the cause paper transport duration when Regi Sensor On Jam generates (63[mm/s])_10[ms/
step]
*Adjusting the value in the plus (+) direction makes the duration longer.
OO
742-233 MSI Jam Clear Assist Control Feed
Time (126[mm/s])
0 -50 50 Adjusts the cause paper transport duration when Regi Sensor On Jam generates (126[mm/s])_10[ms/
step]
*Adjusting the value in the plus (+) direction makes the duration longer.
OO
742-234 Sub Motor Speed Fine Adjustment
(Plain/126 Speed/Tray1)
24711 16000 26000 Adjusts the Sub Motor Regi Transport Speed. (Plain/126 Speed/Tray1) [Division Ratio] O O
742-235 Sub Motor Speed Fine Adjustment
(Plain/126 Speed/MSI)
24711 16000 26000 Adjusts the Sub Motor Regi Transport Speed. (Plain/126 Speed/MSI) [Division Ratio] O O
742-236 Sub Motor Speed Fine Adjustment
(Plain/126 Speed/Tray2)
24932 16000 26000 Adjusts the Sub Motor Regi Transport Speed. (Plain/126 Speed/Tray2) [Division Ratio] O O
Table 1 NVM 742_Paper Handling List
Chain-Link NVM Name
Default
Value
Minimum
value
Maximum
value Description
Write
Allowed/
Protected
Can be
initialized
To Next Page
Loading...
Need help?
General
