05/2014
6-183
DC SC2020
General
6.3.22 System_Data (FAX Service)
Version 1.1
6.3.22 System Data (FAX Service)
Table 1 6.3.22 System_Data (FAX Service)
Chain-Link NVM Name Detailed Description OFF/ON Default Value Setting Range
701-009 Destination Secondary Priority Order Indication
Setting of Communication Maintenance Report
1 0: Destination Name (Displayed only
during original protocol)
1: Tel Number
701-010 FAX Receiving Sending Setting O 0 0: Do not transfer
1: Transmit only during error
2: Always transmit
3: Always Email transmit
4: Always Server transmit
701-011 Print Setting during FAX Receiving Sending O 0 0: Do not print when transmit
1: Print when transmit
701-012 Process when Print setting does not print dur-
ing sending error and transmitting of FAX
receiving and sending
O 1 0: Do not print
1: Print
790-401 Specify the resolution when receiving 0x00 0x00: Normal
0x01: 400,300,200,100
0x02: R16x15.4, R8x15.4, R8x7.7,
R8x3.85
0x04: R8x15.4, R8x7.7, RR8x3, 85
0x08: 300, 200, 100
0x10: 200, 100
0x20: R8x7.7, R8x3.85
0x40: 100
0x80: R8x3.85
821-101 Operation Mode Needs to be set to [1] if FAX communication Monitor sounds
are coming out from speakers.
0 0: Normal Mode
1: Maintenance Mode
821-201 Operation after error such as memory over from
sending accumulation
Decides the operation when error occurs during sending accu-
mulation. [1] when sending FAX up to the end of Read page,
[0] when deleting all read page.
1 0: Erase All
1: Issue Accumulated Document
821-202 Pause FAX receiving,
Memory remaining value (%) threshold value
for No FAX Receiving (when Color FAX is dis-
abled)
0 0~100:0%~100%
821-203 Move to Immediate Receiving
Remaining Memory (%)Threshold Value
20 0~99:0%~99%
821-204 Stop Sending Accumulation,
Do not allow Sending Accumulation Start
Remaining Memory (%)Threshold Value
0 0~100:0%~100%
821-205 Color FAX Disable/Enable O 0 0: Disabled
1: Enabled
821-206 Memory remaining value (%) threshold value
for No FAX Receiving (when Color FAX is
enabled)
00: 0.5MB
1: 1.0MB
2: 1.5MB