05/2014
6-184
DC SC2020
6.3.22 System_Data (FAX Service)
Version 1.1
General
821-207 Start Garbage Collection
Remaining Memory (%)Threshold Value
50 0~99:0%~99%
821-401 Page Split Margin
(When RECEIVE_REDUCTION is 2)
20 0~127: 0mm~127mm
821-403 Auto Reduce O 2 0: Page Break
1: Discard without Page Break
2: Auto Reduce On
821-406 Maximum Value of 1 page data amount for
color receiving
16 0~64: 0~4MB
(1step=64KB)
821-407 Duple Print Setting when Printing O0 0: OFF
1: ON
821-411 Auto Eject Communication Maintenance Report 10: OFF
1: ON
821-412 Page Split Margin
(When RECEIVE_REDUCTION is 2)
30 0~127:0mm~127mm
821-413 Print on a large recording paper O 1 0: Do not Print
1: Print
825-002 Line Type O 0 0: PSTN
1: PBX
825-003 Dial Type 00: PB
1: DP10
2: DP20
825-004 Time until relay is switched when pulse dialing
(waiting time for line to stabilize)
Time until PB is switched when pulse dialing in [:]. PB will be
sent after waiting for this system data value time after dial
pulse.
1 0~255: 0ms~2550ms
1STEP/10ms
825-005 Allow/Prohibit DRPD Setting DISTINCTIVE RING Setting O 1 0: Prohibit
1: Allowed
825-006 DRPD Setting Fax Auto Switch O 4 0: reserve
1: pattern1
2: pattern2
3: pattern3
4: pattern4
5: pattern5
6: pattern6
7: pattern7
825-013 20PPS Pulse Dial If this is prohibited, even 20PPS is instructed for Dial Type
[DIAL_TYPE] it will still operate in 10PPS.
10: Allow DP20
1: Prohibit
825-014 Auto Receiving Switch Mode 10: Tel Only
1: FAX Only
2: TEL/FAX
3: ANS/FAX
4: DRPD
825-015 CNG Detection Time 165 0~255: 0s~25.5s
Table 1 6.3.22 System_Data (FAX Service)
Chain-Link NVM Name Detailed Description OFF/ON Default Value Setting Range
To Next Page
Loading...
Need help?
General
