05/2014
6-253
DC SC2020
General
6.4.14.5 Relay/Signal Test
Version 1.1
8. Use the [Up arrow] or [Down arrow] button to change the value and then press the [OK] button to
start sending the signal.
Figure 6 j0bs64132
9. To stop sending the signal, press the [<--] (Back) button.
Figure 7 j0bs64133
10. Press the [<--] (Back) button to return to the [Fax Scanner Diag] screen.
Figure 8 j0bs64134
11. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode")
To Next Page
Loading...
