NOTE: The ISA includes the document feeder, sub-scanner assembly (SSA), and the scanner control board
(SCB)
586 printers only.
1. Before proceeding, locate the ISA mounting bracket (callout 1) on the bottom of the ISA and the tray
(callout 2) on the printer base.
Figure 1-527 Locate the ISA mounting bracket
2. Position the ISA on the printer.
CAUTION: The ISA is bulky and heavy. Do not drop the ISA.
IMPORTANT: Keep the front of the ISA tilted up so the cables and wire harness are not damaged.
Figure 1-528 Install the ISA
ENWW Removal and replacement procedures 327
To Next Page
Loading...