Konica Minolta CS-7 User Manual

100
5.3 Exposure with DR Detector (Aero Sync mode)
5.3.2 New registration of
patient information
New registration of patient information is performed
with the patient registration screen. Select the
[PatientReg.] tab on the initial screen to display the pa-
tient registration screen.
1
Press the column for the patient ID.
2
Press the input panel, and input the patient ID.
3
Press [Enter].
4
Input patient name, sex and date of birth.
• After each inputting item, press [Enter].
• If you press [Enter], the cursor will move to the
next item.
HINT
•••••••••••••••••••••••••••••••••••••
• If the length of an entry exceeds the dimensions of the
display pane of the item or if the entry spreads across
multiple lines, the long-sentence comment pop-up but-
ton [
] is displayed.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
5
Press [Perform].
• Registration is performed in the patient data-
base of this device, and the exposure screen or
the body part selection screen is displayed.
HINT
•••••••••••••••••••••••••••••••••••••
• Because input of "Sex", "Pregnancy" are displayed
with selection buttons instead of the input panel, press
the selection buttons.
• When entering "Institution Residence", "Hospital
Department" and "Requesting Physician", select the
names from the pull-down menu or selection button,
or input them directly with the keyboard.
• With the input item as a search key, search the patient
database for this device, or a higher system.
• When there is a patient ID that matches, name, sex
and age are displayed.
When there is no patient ID that matches, the cursor
moves to the following input eld.
•••••••••••••••••••••••••••••••••••••••••••••••••••••

Konica Minolta CS-7 Specifications

General

Brand	Konica Minolta
Model	CS-7
Category	Measuring Instruments
Language	English