Konica Minolta CS-7 User Manual

112
5.4 Exposure with CR cassette
• The selected Exam. Tag is added to the Exam.
Tags display area. By repeating from step 1,
Exam. Tags can be added.
4
When nished selecting/adding the Exam.
Tags, press [Perform].
• The exposure screen is displayed.
HINT
•••••••••••••••••••••••••••••••••••••
• When only reserving an examination, after adding the
Exam. Tag, press [Schedule]. After reservation is per-
formed, the initial screen is displayed.
• Returning to the initial screen by pressing [Schedule]
does not set study date and time of image supplemen-
tal information automatically.
• It is also possible to register multiple exposure methods
in 1 Exam. Tag. Register these methods when install-
ing.
• If you have set to register the Exam. Tags automati-
cally, the body part selection screen is not displayed.
The display transitions to the exposure screen.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
5.4.5 Exposure
For exposure when CR cassettes are used, there are
2 types, bar code registration and specified reading
sequence.
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• Always check the patient information and exposure
conditions before exposure.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT
•••••••••••••••••••••••••••••••••••••
• Registration of the CR cassette is performed on the
exposure screen with any of the exposure methods.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
z
Exposure with bar code registration
When CR cassettes are managed with bar codes, per-
form exposure with the following procedure.
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• Exposure with bar code registration is not available
when using a REGIUS SIGMA/SIGMA2 CR cassette.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
1
Place focus on image display area that
the CR cassette is to be registered.

Konica Minolta CS-7 Specifications

General

Brand	Konica Minolta
Model	CS-7
Category	Measuring Instruments
Language	English