9.1 Various problems and countermeasures
381
Chapter 9
9.1.5
Reacquisition of images
from the REGIUS
Reacquire the images when images cannot be re-
ceived from the REGIUS after the exposure due to
reasons such as communication errors, etc.
1
When the message "Image reception is
not completed. Check the network." ap-
pears, press [OK].
2
Please check the connection status with
REGIUS.
• A confirmation screen will be displayed. Press
[OK].
• The "Receiving the retransmitted images"
screen is displayed.
• It continues until the images are received suc-
cessfully.
• Images are reacquired and displayed.
HINT
•••••••••••••••••••••••••••••••••••••
•
If you cancel via the "Receiving the retransmitted imag-
es" screen, a conrmation screen which says, "Are you
sure you want to cancel image reception? Restart the
reader in case of reception canceled." will be displayed.
→ Press [
OK] to cancel retransmission. The REGIUS
needs to be restarted.
→
Press [Cancel] to return to the "Receiving the retrans-
mitted images" screen, and to continue receiving.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
9.1.6 Communications error
during image reception
When a fault occurs in network communications while
receiving images, operation sometimes becomes im-
possible.
When operation cannot be continued after about 5
minutes have elapsed, shut down this device and re-
start.