Konica Minolta CS-7 - Functions of the Viewer Screen; Change of E;F;HS Parameters

176
6.7 Functions of the viewer screen
Before each operation, select the image to adjust and
select the [Image Proc] tab on the control panel.
Image adjustment performed on the viewer screen
Changing E/F/HS parameters
Changing ROI area
Changing e󰀨ective image area
Changing masking area
Modifying the S value/G value
Zooming in and out
Moving an image
Rotate&Flip display
Grid removal/Scattered radiation correction
Positioning of annotation
Adjusting an annotation
Creating/editing annotation characters
6.7.1 Change of E/F/HS
parameters
The parameters can be changed.
1
Press [Tool].
• There are 3 types of processing: E process, F
process, and HS process.
• The viewer screen is displayed.
2
Select the process and change the param-
eter.
Icon Functions
Switches the E process [ON]
and [OFF].
Switches the F process [ON]
and [OFF].
Switches the Hybrid process
[ON] and [OFF].
Switches the HS process [ON]
and [OFF].
Performs ne adjustments.
Resets operations performed
in the tab.
3
Press [Return] after the change.
• Returns to the exposure screen.