Konica Minolta CS-7 - DR Detector Registration Process

83
Chapter 4
The DR Detector will be automatically registered when
it is inserted into an AeroDR Battery Charger/AeroDR
Battery Charger2 or connected to an Wired cable.
1
Insert the DR Detector into the AeroDR
Battery Charger/AeroDR Battery Charger2.
Alternatively, connect the DR Detector to
an Wired cable.
• The DR Detector is registered.
2
Check registration of the DR Detector in
the icon display of the application bar.
• When registered normally, the DR Detector icon
is displayed in the application bar.
4.4 Registration of the DR Detector