Konica Minolta CS-7 - Individual Output

161
Chapter 6
• The device icon of the output destination (host
(electronic medical record)/printer) is displayed.
• [ ] changes to [ ] indicating that output
is done.
HINT
•••••••••••••••••••••••••••••••••••••
• The output destination device icon is lit in green during
output.
• When an error occurs during output, the output desti-
nation device icon is lit in red. Output is resumed when
the cause of error is solved.
• During output, when adjustment is performed on the
image being output, the results of image adjustment
during output are not reected.
• The device icon of the host is displayed also when the
electronic medical record is specified as the output
destination.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
This section describes the procedure for outputting im-
ages from the exposure screen and the operation per-
formed when the [Output] tab is selected on the control
panel of the exposure screen.
6.5.1 Individual output
Once examination is nished, exposed images can be
not only batch output, but also output individually.
1
Select an image to output.
2
Press [ ].
6.5 Exposure Screen ([Output] Tab) Functions