Konica Minolta CS-7 User Manual

16
Introduction
Items to be set with the user tool
Items to be set with user tool are shown in the following diagram.
More information about the user tool is described in the "CS-7 User Tool Operation Manual".
[Setting]
[System] area
[Setting]
[Screen Setting]
[Patient DB]
[Overlay] area
[Marker]
[Panel] area [Panel Setting]
For setting the automatic number issuing function
and default Exam. Tag for trauma patients.
[Trauma Patient]
[Stamp]
For adding and editing the Exam. Tag settings.[Edit Exam Tag]
For adding and editing information about
the exposure settings.
[Exposure Condition]
For selecting an Exam. Tag that is set for a
default Exam. Tag.
[Default Exam. Tag]
[Hospital Information] area
[Operator]
[Department]
[Requesting Physician]
[Location]
[Backup/Restore]
[Backup] area
[Backup]
[Restore] area
[Restore]
[Exam. Tag] area
Tool classification
selection button
Tool classification
display area
Tool selection button
Function
[Auto backup] area
[Setting]
[Maintain DB and images]
For confirming and editing the information
of the institution and device.
For setting the display items of patient registration
screen, list screen, etc. and the layout.
For editing the patient information
registered in the database.
For setting the marker to be
overlaid on images.
For setting DR Detector.
For setting the stamp to be
overlaid on images.
For registering and editing the
selection of the operator names.
For registering and editing the
selection of the hospital departments.
For registering and editing the selections for
requesting physician names.
For registering and editing the
selection of the hospital wards.
For saving the settings of this device,
patient information and logs.
For restoring saved settings and patient
information.
For setting the auto backup function.
For restoring or deleting automatically backed
up data.
For associating RIS codes sent from
the RIS with codes for this device.
[RIS Code Mapping]
[Log Management]
[Reject Log]
For managing operation logs of this device.
For managing logs of rejected images of
this device.
[Image Processing] area
[Image Processing (Exam. Tag)]
[Image Processing (List)]
For adjusting the image processing
parameter of the Exam. Tag.
For adding and editing information about
image processing.

Konica Minolta CS-7 Specifications

General

Brand	Konica Minolta
Model	CS-7
Category	Measuring Instruments
Language	English