Konica Minolta CS-7 - Statistics and Summary Tool Usage

313
Chapter 7
7.15.2 Acquisition of various
information
Acquire various information following the procedure
below.
1
Display the user tool screen, and start the
statistics/summary tool.
• For how to display the user tool screen and
how to start the statistics/summary tool, refer to
"User Tool Operation Manual".
• The statistics/summary tool starts.
2
Press the type selection button for in-
formation to be acquired to specify the
search range, etc.
7.15 Statistics/summary tool
With the statistics/summary tool, various information
items such as exposure status of this device or this
device within the network or operation status of the DR
Detector can be referenced or output into a le.
7.15.1 Screen structure
The basic screen structure of the statistics/summary
tool is as follows. The type of information to be dis-
played will vary according to the tool.
(6)
(4)
(5)
(1)
(2)
(3)
Number Name Functions
(1)
Information type
selection button
Select the type of information
to be referenced.
(2)
Period specica-
tion, operator
name, modality,
reader selection
Select the period when
information is collected or the
operator name, etc.
The options (lter conditions) will
change according to the type of
information to be referenced.
(3)
Information dis-
play area
Displays information in a list
format. Pressing the item
name of displayed informa-
tion sorts the item name in
ascending/descending order.
(4) List Update button Refreshes the displayed list.
(5)
Export CSV
button
Outputs the displayed list in
CSV format. When the list
has been sorted, outputs in
the sorted state.
(6) OK button Exit the statistics/summary tool.
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• Units of this device that are started and within the
network are the target of statistics and summary.Units
of this device connected to the network but not started
are not the target of statistics and summary.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT
•••••••••••••••••••••••••••••••••••••
• The items to be displayed in the information display
area and order of the items are set at installation.
•••••••••••••••••••••••••••••••••••••••••••••••••••••