Konica Minolta CS-7 - Image Output Per Examination in; The Multi-Study

301
7.12 Multi-study
Chapter 7
HINT
•••••••••••••••••••••••••••••••••••••
• When canceling the deleted state of the exposure
item, select the currently deleted exposure item again.
• For the selection, press [ ] icon to the left side of
the exposure item.
– [Del Study] button changes to [Undelete] button.
– Press [Undelete].
– The exposure item is restored from the deleted
state.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
7.12.6 Image output per exami-
nation in the multi-study
The following describes how to output every image
that has been exposed but not yet output on an exami-
nation item basis.
HINT
•••••••••••••••••••••••••••••••••••••
• If you want to output exposed images on a piece-by-
piece basis, press [ ] on [Exam.Tag] tab screen.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
1
Select the exposure item to be output
from the exposure screen ([Study List] tab
screen).
• For the selection, press the icon on the left side
of the exposure item.
• After the selection, the button portion on the left
end is focused on.
2
Press [Output Image].
• Every image in the selected examination item is
output.