263
7.7 One Shot stitching exposure
Chapter 7
2
Press [OFF] or the button of the output
size to be changed on the Split Output
Size dialog box.
• The output size is changed.
HINT
•••••••••••••••••••••••••••••••••••••
• When output of split images is enabled, a frame
appears on the image to indicate the area of the split
image that will be output.
Split output frame
Trimming frame
• The size of the trimming frame changes in accordance
with changes to the size of the image frame so that
images are automatically split into the selected
section size. Images can be split into a maximum of 3
sections.
• If the split image is smaller than the trimming region,
the entire combined image may not completely fit
within the selected region.
• If the conguration of the split images results in one
image, the split processing is not applied, and the split
output frame does not appear.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
7.7.2 Exposure
The One shot stitching exposure method using
DR Detector is as follows.
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• If One Shot stitching exposure is carried out, please
be careful of the following items.
– Image copying is not possible.
– Image replacing is not possible.
– Exposure condition copying is not possible.
– Automatic sorting of the order of exposures is not
possible.
– The reading conditions can not be specied.
– The scattered radiation collection is not possible.
– Lung lack/body motion blur detection is not pos-
sible.
– Examination sharing is not possible.
– Merging and separation of studies is not possible
•••••••••••••••••••••••••••••••••••••••••••••••••••••
1
After transitioning from the initial screen
to the exposure body part selection
screen, select the Exam. Tag for One shot
stitching exposure.
• The selected Exam. Tags are displayed on
the Exam. Tags display area. By selecting the
Exam. tags again, further Exam tags can be
added.
To Next Page
Loading...
Need help?
General
