324
7.18 Checkup mode
z
List screen
You can display [Delete All] in the tool bar area de-
pending on the setting.
For more details, contact Konica Minolta technical rep-
resentatives.
(1)
Number Name Functions
(1) Delete all button
Deletes all the unexposed
studies. Press this button to
display the dialog.
Press [OK] to perform the
deletion.
7.18.2 Preset setting proce-
dure
The following describes how to set the preset.
z
When setting up new presets
As there are no presets in the initial state, it is neces-
sary to set new presets.
1
Press [System] on the initial screen.
• The system monitor screen is displayed.
2
Press [Checkup].
• The checkup setting screen is displayed.
3
Select the preset button to be set from the
tabs on [Page1] through [Page6].
4
Press [Setting].
• The checkup preset setting screen is displayed.
To Next Page
Loading...
