Konica Minolta CS-7 - Page 323

323
7.18 Checkup mode
Chapter 7
z
Checkup preset setting screen
This screen is used for setting the preset. You can set
the rules for the automatic issuing of patient IDs and
accession numbers.
You can display this screen by pressing [Setting] on
the checkup setting screen.
(2)
(7)
(8)
(1)
(3)
(4)
(5)
(6)
Number Name Functions
(1) Preset Name
Enter a preset name.
Up to 16 characters can be
used.
(2) Target item tab
Select the target item of the
automatically issued number
by choosing the correspond-
ing tab.
(3)
Component se-
lection menu
Select the components of
the issued number from the
menu.
(4) Issue image
Displays an example of the
number when issued accord-
ing to the specied automatic
issue format.
[Next Value] is indicated as
the value of the serial num-
ber.
(5)
Occurrence Num-
ber
Set the starting and ending
values of a serial number.
If you press [Reset] button,
[Next value] is returned to
the starting value.
(6)
Exam. Tag setting
area
Displays the set Exam. Tags.
Press [Exam. Tag] to display
the Exam. Tag setting screen
to set the Exam. Tags.
(7) Cancel button
Closes the screen without
saving the modications
made on this screen.
(8) OK button
Closes the screen after sav-
ing the modications con-
ducted on this screen.
z
Exam. Tag setting screen
Set the conditions of the automatic exposure.
You can display this screen by pressing [Exam. Tag]
on the checkup preset setting screen.
(2)
(5)
(6)
(1)
(4)
(3)
Number Name Functions
(1) Body Part Filter
Narrows down the Exam.
Tags to be displayed in [Body
parts list].
(2) Body Parts List
Displays the list of the Exam.
Tags that are available for
the setting.
(3) Delete button
Deletes the selected Exam.
Tags from the Exam. Tags
area.
(4) Cancel button
Closes the screen without
saving the modications
made on this screen.
(5)
Exam. Tags set-
tings area
Displays the Exam. Tags to
be set.
You can register the tags by
dragging and dropping the
Exam. Tags from [Body Parts
List]. Up to 128 shots of
Exam. Tags can be regis-
tered. You can modify the
alignment sequence of the
registered Exam. Tags with
drag and drop operations.
(6) OK button
Closes the screen after sav-
ing the modications con-
ducted on this screen.