56
3.5 Exposure screen
3.5.7 Control panel (Image Proc: Image processing)
This is the control panel to adjust images after exposure. Basic image adjustments such as change of S/G value, etc.
can be made.
(11)(10)
(1)
(2)
(3)
(5)
(6)
(7)
(8)
(9)
(4)
Number Name Functions
(1) S Value slider/button
Adjusts the S value.
Pressing [ ] increases or decreases the S value step by step.
Pressing [ ] increases or decreases the S value in multiples of the
preset value.
The S value can also be adjusted by dragging the slider.
(2) G Value slider/button
Adjusts the G value.
Pressing [ ] increases or decreases the G value step by step.
Pressing [ ] increases or decreases the G value in multiples of the
preset value.
The G value can also be adjusted by dragging the slider.
(3) ROI/ROI Adjustment buttons
Press [ROI] and ROI is displayed. Press again and it is released. Press
[ROI Adjustment] and the viewer screen is displayed.
(4) ZOOM+/ZOOM-/FIT/Detail buttons
Changes the display method of the image that has focus.
[ZOOM+]:
Switches to the zoom-in mode. Pressing it again cancels the zoom-in
mode.
Pressing the image in the zoom-in mode enlarges the display 1 step at
a time.
[ZOOM-]:
Switches to the zoom-out mode. Pressing it again cancels the zoom-
out mode.
Pressing the image in the zoom-out mode reduces the display 1 step at
a time.
[FIT]:
Displays the enlarged (or reduced) image to t in the frame size (size
of the image display area).
[Detail]:
The viewer screen is displayed and the exposed image is displayed
zoomed in.
To Next Page
Loading...
