Konica Minolta CS-7 User Manual

73
Chapter 3
3.7 System monitor screen
3.7.2 Warranty Component
This is the screen to check type and status of regular replacement parts when the time for replacement comes.
(7)
(5)
(6)
(2)
(3)
(1)
(4)
Number Name Functions
(1) Function switching tab Switches between the [System Monitor] and [Warranty Component] tabs.
(2) Display selection menu
Selects the type of replacement unit or replacement unit status.
(3) Replacement unit list Displays the reader name, replacement unit, and status.
(4)
ON/OFF switching button
(Replacement Notice)
Switches the replacement notication function on/o󰀨.
(5) Unit usage status display
Displays the usage status and replacement estimation of the replacement
unit chosen from the list.
(6) Edit button
Used by service engineers to edit the information about the replacement
unit. This button is not displayed in the log-in mode.
(7) System menu
Starts a utility or shuts down the system. This is displayed regardless of
tabs being selected.
[Media]: The media output screen is displayed.
[Utility]:
Starts utilities. This button is not displayed if the user authorization of
the logged-in operator is "Technologist".
[Update]: Refreshes information.
[Checkup]: Displays the checkup setting screen.
[Manual]:
The "CS-7 Operation Manual" is displayed. This button is not displayed
if the manual le is not deployed.
[TeamViewer]: Displays the TeamViewer startup button.
[Close]:
Exits the system monitor screen, and the previous screen is displayed.

Konica Minolta CS-7 Specifications

General

Brand	Konica Minolta
Model	CS-7
Category	Measuring Instruments
Language	English