Konica Minolta CS-7 - Control Panel (Overlay - for Host)

65
Chapter 3
3.5 Exposure screen
3.5.14 Control panel (Overlay - for host)
This is the control panel to perform setting of host overlay.
(1)
(2)
(3)
(5)
(7)
(9)
(4)
(6)
(8)
(10)
Number Name Functions
(1) Host/Printer switch button
Switches overlay for host and for printer.
(2) Same settings for host and printer
Press this button when sending the same overlay conditions set for host
to printer. Not displayed when the printer is not registered as the output
device.
(3) Marker 1 selection button Set the marker to display.
(4) Marker 1 position button Set the position of the marker to display.
(5) Marker 2 selection button Set the marker to display.
(6) Marker 2 position button Set the position of the marker to display.
(7) Stamp selection button Set the stamp to display.
(8) Stamp position button Set the position of the stamp to display.
(9) Scale selection button Select type of scale or grid.
(10) Preview button Displays a preview image in which the set overlay content is reected.