Konica Minolta CS-7 - Printer Status

193
Chapter 6
6.8 Functions of the system monitor screen
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• Change the output destination only after fully under-
standing the operation status of the system. It may
cause output of an image to the same host twice, or
may disable output to the image diagnosis host.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT
•••••••••••••••••••••••••••••••••••••
• To keep output reservations (queues) intentionally in
this device, set the output reservation to [OFF]. Delete
unwanted queues among the accumulated queues,
then switch the setting to [ON] so that only necessary
queues can be sent to the host.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
6.8.5 Printer status
The status of printers connected to this device can be
conrmed.
(10)
(2)
(1)
(3)
(4)
(5)
(6)
(8)
(9)
(7)
Number Name Functions
(1) Printer
The printer name, printer type and
error description
are displayed.
(2) Status
Printer IP address, port num-
ber, AE title, ping status, and
device condition are displayed.
(3) Ping button Press to conrm the ping status.
(4) Route button
Press to conrm Route infor-
mation.
(5)
Number of
reserved images
The number of images not
sent to the printer is displayed.
(6)
Output switch
button
Switches between [ON] and [OFF]
of printer output. Outputs when
set to [ON], and does not output
to printer when set to [OFF] and
the output reservation (queue) will
remain in this device. Switches
between [ON] and [OFF] every
time the button is pressed.
(7)
Output reserva-
tion list
Output reservations (queues)
remaining in this device are
displayed.
(8)
Delete button,
Select All
button,
Clear All button
Deletes output reservations be-
ing displayed in the output res-
ervation list. Select a displayed
output reservation and press
[Delete] to delete. To delete all
output reservations, press [Se-
lect All] and then press [Delete].
When [Clear All] is pressed, the
selection is released.
(9)
Primary/Second-
ary button
To switch the output destination
to backup, select [Secondary].
[Secondary] is displayed only for
the number of connected devices.
(10) Back button Closes the screen.
HINT
•••••••••••••••••••••••••••••••••••••
• To keep output reservations (queues) intentionally in
this device, set the output reservation to [OFF]. Delete
unwanted queues among the accumulated queues,
then switch the setting to [ON] so that only necessary
queues can be printed.
•••••••••••••••••••••••••••••••••••••••••••••••••••••