Konica Minolta CS-7 - Starting Checkup Mode

329
7.18 Checkup mode
Chapter 7
8
Press [OK].
• The display returns to the checkup settings
screen.
9
Press [OK].
• The display returns to the system monitor
screen.
10
Press [Close].
• The display returns to the initial screen.
7.18.3 Starting checkup mode
Start checkup mode and perform preparations for tak-
ing exposure.
1
Press [System] on the initial screen.
• The system monitor screen is displayed.
2
Press [Checkup].
• The checkup setting screen is displayed.
3
Press [Checkup Mode] to turn it [ON].
• Press [Checkup Mode] to switch between [ON]
and [OFF].