Konica Minolta CS-7 User Manual

295
7.12 Multi-study
Chapter 7
Number Name Functions
(3) Exposure item list
Exposure item list is dis-
played.
(4)
Image copy but-
ton
Copies the exposed image
(examination).
(5)
Image replace
button
Replaces the exposed image
(examination) with another.
(6)
Exposed image
button
Saves the exposed image
and operating state.
(7) Output button Outputs the exposed images.
Body part selection screen
(2)
(3)
(1)
Number Name Functions
(1)
Accession No.
Accession number of the
displayed examination is
displayed.
(2) Issue button
Issues the accession num-
ber.
(3) Delete button
Deletes exposures individu-
ally after selecting the expo-
sure to be deleted.
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• Aside from the screen structures explained here, each
screen is the same as usual. However, [
] cannot
be pressed on the exposure screen when performing
an examination with multi-study.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
7.12.2 Multi-study examination
from the list screen
The following describes the procedure for implement-
ing the multi-study based examination from the list
screen.
1
Press [Refresh] on the list screen.
• It acquires the information from the higher sys-
tem to update the list.
2
Select the examination item.
• The selected examination is highlighted.

Konica Minolta CS-7 Specifications

General

Brand	Konica Minolta
Model	CS-7
Category	Measuring Instruments
Language	English