Konica Minolta CS-7 - Control Panel (Output - for Printer)

64
3.5 Exposure screen
3.5.13 Control panel (Output - for printer)
This is the control panel to perform setting of printer output conditions.
(7)
(5)
(3)
(1)
(9)
(2)
(6)
(8)
(4)
Number Name Functions
(1) Host/Printer switch button
Switches output conditions for host and for printer.
(2) Hosts also send the same size
Press this button when sending the same output conditions set for printer
for host.
(3) Format button Select the format for output. Select from A format and AB format.
(4) Film Size button Select the lm size.
(5) Direction button
Switches the orientation between portrait and landscape when outputting.
(6) Number
Set the number of output with [+] and [-]. It can be set in the range from 1
to 9.
(7) Output Type button Select the output type.
(8) Reset button
Returns to the state when image was displayed. Film Size and number of
sheets are reset.
(9) Preview button Displays a preview image in which the set output conditions are reected.
HINT
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
• If [Reset] is pressed while pressing [Hosts also send the same size], the image (trimming size) to be sent by the host is also
reset.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••