Konica Minolta CS-7 - Moving Images

310
7.14 Merging and separation of studies
7.14.3 Moving images
The procedure for moving images between studies is
as follows.
HINT
•••••••••••••••••••••••••••••••••••••
• To combine studies, select the suspended and ex-
posed studies and combine (reassign) them with
unexposed images. However, you can move images
regardless of the status of the source or destination
study.
Example: Unexposed study and unexposed study,
suspended study and exposed study
• The Image Move button may not be displayed de-
pending on settings, resulting in an image movement
failure.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
1
On the list screen, select the study from
which to move images.
2
Press [Merge].
• The Study Search screen is displayed.
3
Enter the patient name, ID, and other
items of the study to move images to.
HINT
•••••••••••••••••••••••••••••••••••••
• When an accession number is used for the search,
you can search for all studies related to the patient IDs
of the target study. When using this function, contact
Konica Minolta technical representatives.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
4
Press [Search].
• A conrmation screen is displayed.
HINT
•••••••••••••••••••••••••••••••••••••
• When there are multiple sets of study results, the se-
lection screen that is displayed when multiple relevant
studies have been found is displayed. If you select a
destination to move a study to and press [Execute],
the conrmation screen shown in Step 5 is displayed.