142
6.4 Functions of the exposure screen
6.4.9 Switching from the
DR Detector to the CR
cassette
When exposing with an DR Detector, it is possible to
switch to exposure with CR cassette.
1
Move focus to the unexposed image dis-
play area to be exposed by the DR Detec-
tor.
2
Read bar code of the CR cassette.
• The bar code number is displayed in the Exam.
Tags display area.
3
Perform exposure using the registered CR
cassette.
• Configure the X-ray device settings and check
the exposure setting before making an expo-
sure.
Press the exposure switch
4
The image is read with the REGIUS or
REGIUS SIGMA/SIGMA2.
• The exposed image is displayed.
HINT
•••••••••••••••••••••••••••••••••••••
• The device can also be switched to CR cassette by
pressing the device icon in the unexposed image dis-
play area.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
To Next Page
Loading...
Need help?
General
