Konica Minolta CS-7 - Replacing an Image

140
6.4 Functions of the exposure screen
6.4.7 Replacing an image
You can replace an exposed image (order) with other
images.
z
Screen structure
This is the screen used for selecting the image to be
replaced.
(6)
(5)
(3)
(1)
(4)
(2)
Number Name Functions
(1) First page button
Moves the display to the rst
list of images to be replaced.
(2) Previous button
Moves the display to the
previous list of images to be
replaced.
(3)
Image to be
replaced
Displays the order image to
be replaced.
(4) Next button
Moves the display to the next
list of images to be replaced.
(5) Last page button
Moves the display to the nal
list of images to be replaced.
(6) Cancel button Closes the screen.
z
Image exchange procedure
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• An image cannot be replaced while the following op-
erations are taking place.
– Exposure
– Acquisition of an image from the reading device
• Replacement with the following images is not available.
– The image of an order that was not successfully
acquired from the reading device
– An image of the order that is waiting for image re-
transmission
– Images created by stitching exposure
– A rejected image
– A copied image
– An image exposed as a mammogram and an image
exposed as anything other than a mammogram (an
image exposed as mammogram can be used to re-
place another image exposed as a mammogram)
– An image exposed with a CR cassette and an im-
age exposed with an DR Detector.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
1
Select the replacing image from the order
list.
2
Press [ ].
• The image exchange screen is displayed.
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• Select a replacing image from the exposed order im-
ages.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT
•••••••••••••••••••••••••••••••••••••
• You can display [ ] by setting it using the ser-
vice tool. When [
] is not displayed, contact
Konica Minolta technical representatives.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
3
Select an order image to be replaced.
• A conrmation screen is displayed.