Konica Minolta CS-7 - Switching from the CR Cassette to

143
Chapter 6
6.4 Functions of the exposure screen
6.4.10 Switching from the
CR cassette to the
DR Detector
When exposing with a CR cassette, it is possible to
switch to exposure with an DR Detector.
1
Move focus to the unexposed image dis-
play area to be exposed by the CR cas-
sette.
2
Press the device icon.
• Device icons registered in this device are dis-
played.
3
Select the device in which the DR Detec-
tor is inserted.
4
Perform exposure.
• Configure the X-ray device settings and check
the exposure setting before making an expo-
sure.
Press the exposure switch
• The exposed image is displayed.