Konica Minolta CS-7 - Comprehensive Error Code List and Countermeasures

386
If the following error codes appear, take the respective countermeasures.
IMPORTANT
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
• After performing countermeasures, if the problem does not go away, contact Konica Minolta technical representatives.
• If the displayed error code is not supported on this device, contact Konica Minolta technical representatives.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
• The "*" at the tail of the error code is indicating a character from 0 to 9 or from A to Z.
• For operation of the AeroDR SYSTEM and the REGIUS series, refer to the respective operation manuals.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
10.2.1 Communication errors
Error codes starting with "C2" are indicating communication errors.
Error code Displayed message Problems/countermeasures
C21522
X-ray system error detected.
(1) Pause the examination and start it again.
(2) Restart the X-ray device and this device if it is
displayed again.
C21523 X-Ray device initializing, Please wait. Check the X-ray device status.
C21524
X-ray system connection error.
Check the network.
Check the network status.
C21525
Connection destination X-ray device or DAP error
message displayed.
Contact Konica Minolta technical representatives.
C21526 Parameter setting to the X-ray system error. Check the exposure settings set on this device.
C21527
The X-ray system interlock failed.
Check the X-ray device status.
C21528 The X-ray system inter unlock failed.
C21529 Failed to send the X-ray system buzzer sound (success).
C21530 Failed to send the X-ray system buzzer sound (failure).
C21531 Failed to retrieve DAP value. Contact Konica Minolta technical representatives.
C21541 X-ray system error detected.
Restart the X-ray device and this device.
C21559 Internal error occurred in X-ray communication process.
C27300 -
C27307
[AeroDR Stitching Unit name] Failed to connect
AeroDR Stitching Unit.
Please check the network connection.
Contact Konica Minolta technical representatives.
C27308
[AeroDR Stitching Unit name] Timeout error occurred
in AeroDR Stitching Unit.
Please check the network connection.
C27309 -
C27313
[AeroDR Stitching Unit name] Failed to connect
AeroDR Stitching Unit.
Please check the network connection.
C27314
[AeroDR Stitching Unit name] Communication with
AeroDR Stitching Unit has failed.
Please check the network connection.
C27315
[AeroDR Stitching Unit name] Communication with
AeroDR Stitching Unit has failed.
C27316
[AeroDR Stitching Unit name] Failed to connect
AeroDR Stitching Unit.
Please check the network connection.
10.2 Error codes and countermeasures