Konica Minolta CS-7 - Image Adjustment on the Exposure; Screen

115
Chapter 5
5.4 Exposure with CR cassette
HINT
•••••••••••••••••••••••••••••••••••••
• X-ray exposure information is acquired automatically
when linked to the X-ray device.
• The reading sequence can also be specied with the
order list. With the reading sequence, press Exam.
Tags in order.
• When pressing Exam. Tags for examinations whose
reading sequence has been specified, the reading
sequence specification is canceled. When several
reading sequences are being specified, the reading
sequence after the deleted examination is moved up.
• Exposure with specied reading sequence is suitable
when this device is connected with 1 REGIUS.
• When REGIUS SIGMA/SIGMA2 is connected, the fol-
lowing dialog window appears during the image read-
ing process.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
5.4.6 Image adjustment on
the exposure screen
Performs adjustment of exposed images. Basic image
adjustments such as S value/G value, position of ROI
area, etc. can be made on the exposure screen.
z
Change of S value/G value
Change of S value/G value is performed with the fol-
lowing procedure.
1
Select the image for image adjustment.
• The control panel automatically switches to the
[Image Proc] tab. If it does not switch, select the
[Image Proc] tab manually.
2
Adjust the image.
• Pressing [ ] increases or decreases the
value step by step.