348
7.22 Other functions
7.22.5 Screen saver
When operation is not performed for a certain time, the
screen saver starts.
z
Login as another operator after screen sav-
er is canceled
If displaying the login screen after canceling screen
saver, it is possible to log in with another user ID.
The following procedure describes the case where the
screen saver starts up while logged in as Edward.N,
and logging in as Alan.E after canceling screen saver.
1
After canceling screen saver, input the
user ID and password of Alan.E, then
press [Login].
• A conrmation screen is displayed.
2
Press [OK].
• Press [Cancel] to return to the previous screen.
• The initial screen for user ID of Alan.E is dis-
played.
7.22.6 Bar code reader and
magnetic card reader
When optional bar code reader and magnetic card
reader are used, various types of information can be
read and input.
The following are precautionary items when bar code
reader and magnetic card reader are used.
z
Bar code reader
• When placed on its special stand, the laser is al-
ways in the lit state.
• When used in the constant lit state freeing the
hands, exercise full caution that the laser is not
discharged in a direction where it will enter the
eyes of people.
• The bar code can be read in either up or down
orientation of the CR cassette.
• After pressing the trigger button, if the bar code
is not read in a certain time, the laser goes out.
When reading again, release the trigger button,
press it again, and discharge the laser.
z
Bluetooth bar code reader
• The battery lasts for about 2 days when connect-
ed to a PC via Bluetooth communication.
* Varies depending on the usage.
• When not used, connect the USB cable to
charge.
• For approximate charging time and battery re-
placement, refer to the Bluetooth bar code reader
operation manual.
• The display shifts to sleep state when there are
no operations, and screen display disappears,
however Bluetooth communication is not discon-
nected.
• Communication distance is within 10 m.
* Varies depending on the usage.
• For recovery from the Bluetooth communication
failure, refer to Bluetooth bar code reader opera-
tion manual.
• Data read with the bar code reader while Blue-
tooth communication is disconnected will not be
sent to this device.
*
Accumulated data is not transferred when con-
nection is recovered.
• If bar codes are not transmitted, ID search and
screen transitions are not performed. If not yet
transitioned to the exposure screen, recover the
communication. For the recovery procedure,
refer to the Bluetooth bar code reader operation
manual.
To Next Page
Loading...
