Konica Minolta CS-7 - User Login and Access Control

79
Chapter 4
4.2 Login control
4.2.1 Login screen
It is possible to set a login screen that requires input of
user name and password when starting operations of
this device, or when resuming operations after return-
ing from screen saver.
Login screen
HINT
•••••••••••••••••••••••••••••••••••••
• When the automatic login function is used, you are
automatically logged in when this device starts up and
the initial screen can be displayed.
• If LDAP login authentication has been enabled, the
domain input eld is displayed on the login screen.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
4.2.2 Login
When using login mode, log in with the following pro-
cedure.
1
Input user ID and password, then press
[Login].
• The initial screen is displayed.