Konica Minolta CS-7 - Transmission of Examination Information During Exposure

306
7.13 Examination sharing
7.13.4 Transmission of
examination information
during exposure
The procedure for transmitting examination information
by pausing an examination during exposure is as fol-
lows.
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• The examination information cannot be transmitted
if the examination to be paused includes image re-
transmission standby or examination whose barcode
has already been read.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
1
Press [ ].
• A conrmation screen is displayed.
2
Press [OK].
• Press [Cancel] to return to the previous screen.
• The details conrmation screen is displayed.
HINT
•••••••••••••••••••••••••••••••••••••
• The details conrmation screen may not be displayed
depending on the setting. In this case, pressing [OK]
transmits the data with the preset pending reason to
the preset destination.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
3
Select [Reason] and [Destination].
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• Select [None] for transmission destination if you do
not want to transmit the examination.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
4
Press [OK].
• Press [Cancel] to return to the previous screen.
• Examination is reserved for the specied desti-
nation, and the initial screen is displayed.