Konica Minolta CS-7 - Page 296

296
7.12 Multi-study
3
Press [Perform].
• Exposure screen ([Exam.Tag] tab screen) is dis-
played.
• A list of exposures relevant to the selected ex-
amination is displayed.
4
Select the rst exposure in the shot list.
5
Perform exposure.
• You can use the exposure functions and others
in the same way as you do in the ordinary ex-
aminations. For more information, refer to "5.2
Exposure procedure with DR Detector (Basic
connection)"
and after.
6
Select the second exposure to be ex-
posed.
• When there are two or more exposure items,
repeat the same procedure to proceed with the
second and later exposures.
7
After performing the exposure, press
[
] or [ ].
• Press [ ] to save the exposed image. Press
[
] to output the exposed image.
• After the image is saved or output, the exposure
screen ([Study List] tab screen) is displayed.
8
Press the second examination.
• When there are two or more exposure items,
press the intended examination and proceed
with the exposure using the same procedure.
• Exposure screen ([Exam.Tag] tab screen) is dis-
played.
• Continue with your exposure using the proce-
dures described in Steps 4 to 7.