Konica Minolta CS-7 - Page 412

412
10.2 Error codes and countermeasures
Error code Displayed message Problems/countermeasures
37646
37647
Internal error occurred in PRINTER communication.
Contact a service representative.
Contact Konica Minolta technical representatives.
37648
Internal error occurred in PRINTER communication.
Contact a service representative.
Communication with the imager failed.
(1) Try performing output again.
(2) Contact Konica Minolta technical representatives.
37649
37650
Internal error occurred in PRINTER communication.
Contact a service representative.
Contact Konica Minolta technical representatives.
37651
Internal error occurred in PRINTER communication.
Contact a service representative.
Communication with the imager failed.
(1) Try performing output again.
(2) Contact Konica Minolta technical representatives.
37670 - 37672
Internal error occurred in HOST communication. Con-
tact a service representative.
Contact Konica Minolta technical representatives.
37673
Internal error occurred in HOST communication. Con-
tact a service representative.
Host communications failed.
(1) Check server or network.
(2) Contact Konica Minolta technical representatives.
37674
37675
Internal error occurred in HOST communication. Con-
tact a service representative.
Contact Konica Minolta technical representatives.
37676
Internal error occurred in HOST communication. Con-
tact a service representative.
Host communications failed.
(1) Check server or network.
(2) Contact Konica Minolta technical representatives.
37680
HOST A-ASSOCIATE is rejected. Please check com-
munication setting.
Connection request for communication with the host
was denied. Check the communication settings.
37680
PRINT A-ASSOCIATE is rejected. Please check com-
munication setting.
Connection request for communication with the imager
was denied. Check the communication settings.
37681 HOST A-ASSOCIATE is rejected transient.
Connection request for communication with the host
was temporarily denied. Check the host.
37681 PRINT A-ASSOCIATE is rejected transient.
Connection request for communication with the imager
was temporarily denied. Check the imager.
50000A
Reading order is not selected. In order to perform im-
age retrieval, click on [OK] button to close this dialog,
and then select reading order
After pressing [OK] and closing the dialog, set the
reading sequence.
50000B
Reading order is not selected. To eject the cassette,
click on [Eject] button. In order to perform image
retrieval, click on [OK] button to close this dialog, and
then select reading order.
(1) Press [Eject] to remove the cassette.
(2) After pressing [OK] and closing the dialog, set the
reading sequence.
50001A
50001AB
Required to re-erase since imaging plate was exposed
very much.
As a large amount of X-rays were used during expo-
sure, deletion needs to be performed again.
90001
An error occurred during image reading.
Check the network.
Restart the reader.
Check the console network connection and the CR
cassette reader network connection. After restarting
the CR cassette reader, read the CR cassette with
which exposure performed again.
90002
Image reception is not completed.
Check the network.
Check the console network connection and the CR
cassette reader network connection.
99999
CR Process Initialization failed. Please Restart the
console or call service.
(1) Restart the device.
(2) Contact Konica Minolta technical representatives.