94
5.2 Exposure procedure with DR Detector (Basic connection)
HINT
•••••••••••••••••••••••••••••••••••••
• The S value and G value are automatically adjusted to
the appropriate values at the time of exposure. Adjust
them manually as required.
• Change of S value/G value can also be performed on
the viewer screen. After selection of the image for im-
age adjustment, press the image once more to switch
to the viewer screen. When more advanced image
adjustment is required, perform image adjustment on
the viewer screen where larger images are displayed.
• Dragging the control panel slider or pressing [ ]
increases or decreases the S value/G value in mul-
tiples of the preset value. In addition, when you press
the [S/G] button on the control panel, the S value/G
value can be adjusted by dragging the image.
• Use the user tool to set the drag operation to in-
crease or decrease the S/G values and specify the
degree of change that can be obtained from [ ].
You can also select the setting so that the S/G values
can be adjusted by simply dragging the image or drag-
ging it using both mouse buttons without pressing the
[S/G] button.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
z
Change of parameters
Change of the parameters is performed with the following
procedure.
1
Select an image whose parameters you
want to change.
• The control panel automatically switches to the
[Image Proc] tab. If it does not switch, select the
[Image Proc] tab manually.
2
Press [E] or [F] you want to change.
• Images that were automatically altered by the E
process or F process are displayed.
• When [E] or [F] is pressed again, the original im-
ages are displayed.
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• In the case of a pneumoconiosis examination, a
warning message is displayed when parameters are
changed.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT
•••••••••••••••••••••••••••••••••••••
• The parameter options available on the exposure
screen are only ON and OFF. Perform detailed adjust-
ments on the viewer screen.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
To Next Page
Loading...
Need help?
General
