Motorola RFS Series

Motorola RF Switch CLI Reference Guide
25-24
Example
RFSwitch(config-wireless-smart-rf)#select-channels 1,2,15-17
RFSwitch(config-wireless-smart-rf)#select-channels add
1,2,15-17
RFSwitch(config-wireless-smart-rf)#select-channels remove
1,2,15-17
RFSwitch(config-wireless-smart-rf)#
25.1.18 service
 Smart RF Instance
Invokes service commands to troubleshoot or debug (config-wireless-smart-rf)
instance configurations
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
service show cli
service smart-rf [clear-history|load-from-file|max-history
|replay|rescue|restore|save-to-file|simulate|step-calibrate]
service smart-rf clear-history
service smart-rf load-from-file
service smart-rf max-history <0-65535>
service smart-rf replay enable
service smart-rf rescue <WORD>
service smart-rf restore [WORD]
service smart-rf save-to-file
service smart-rf simulate [coverage-hole <1-4096> UINT_RANGE
{UINT_RANGE|pattern-11a|pattern-11b|
pattern-11bg|pattern-2-mbps}|interference]
service smart-rf simulate interference <WORD>
service smart-rf step-calibrate [assign-channel|
assign-detectors|assign-power|assign-prepare|
assign-rescuers|collect-data|prepare-detectors|
pull-rf-config|push-rf-config|sync-rf-config]