Motorola RFS Series

Motorola RF Switch CLI Reference Guide
5-142
5.1.48 arp
 Global Configuration Commands
Configures Address Resolution Protocol
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
arp [<WORD>|ge <1-5>|sa <1-6>|up1|vlan <1-4094|
wwan]{<AB.C.D> <AA-BB-CC-DD-EE-FF>}
Parameters
Example
RFS4000(config)# arp ge 2 1.2.3.4 11-22-33-44-55-66
RFS4000(config)
arp [<WORD>|ge <1-5>|sa
<1-6>|up1|vlan <1-4094|
wwan] {<AB.C.D> <AA-
BB-CC-DD-EE-FF>}
Configures address resolution protocol.
• <WORD> – Configures interface name
• ge <1-5> – Configures Gigabit Ethernet interface
• sa <1-6> – Configures Static Aggregate interface
• up1 – Configures WAN interface
• vlan <1-4094> – Configures vlan
• wwan – Configures wireless WAN interface
The following parameters are common for all the above.
• <A.B.C.D> – Displays Internet Protocol
• <AA-BB-CC-DD-EE-FF> – Displays MAC address