Radius Server Instance
19-37
19.1.15 rad-user
Radius Configuration Commands
Sets RADIUS user parameters
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
rad-user <user-name>
rad-user <user-name> [access|password|privilege]
rad-user <user-name>
access [console|ssh|telnet|web]
rad-user <user-name> password [0 <password>|2 <password>
|<password>] group guest expiry-time <HH:MM> expiry-date
<MM:DD:YYYY> start-time <HH:MM> start-date <MM:DD:YYYY>
access-duration <duration-time>]
rad-user <user-name> privilege [helpdesk|monitor|
nwadmin|superuser|sysadmin|webadmin]
Parameters
<user-name>
[access|console|ssh
|telnet|web>]
Enter a user name up to 64 characters in length
• access [console|ssh|telnet|web>] – Set management
user access mode
• console – Only allowed from console
• ssh – Only allowed from ssh
• telnet – Only allowed from telnet
• web – Only allowed from applet
To Next Page
Loading...
