Crypto-trustpoint Instance
The (config-crypto-trustpoint) commands define a Certificate Authority (CA)
trustpoint. This is a separate instance, but belongs to the
crypto pki trustpoint
mode under the config instance.
To navigate to this instance, use the command
RFSwitch(config)#crypto pki trustpoint <trustpoint-name>
RFSwitch(config-trustpoint)#
11.1 Trustpoint (PKI) Config Commands
Table 11.1 summarizes config-crypto-trustpoint commands:
Table 11.1 Trustpoint (PKI) Config Command Summary
Command Description Ref.
clrscr Clears the display screen page 11-3
company-name Defines a company name for the trustpoint page 11-4
email Sets an e-mail ID for the trustpoint page 11-5
end Ends the current mode and moves to the EXEC mode page 11-6
exit Ends the current mode and moves to the previous mode page 11-7
fqdn Sets the domain name of the trustpoint page 11-8
help Displays the interactive help system page 11-9
To Next Page
Loading...
Need help?
General
