Motorola RFS Series User Manual

Radius Server Instance
Use the (config-radsrv) instance to configure local RADIUS server parameters.
Local (Onboard) RADIUS server commands are listed under this mode. To navigate to this
instance, use the command:
RFSwitch(config)#radius-server local
RFSwitch(config-radsrv)#
19.1 Radius Configuration Commands
Table 19.1 summarizes the Global Config command:
Table 19.1 RADIUS Server Command Summary
Command Description Ref.
authentication Configures the authentication scheme used with the
RADIUS server
page 19-3
ca Defines CA parameters page 19-5
clrscr Clears the display screen page 19-6
crl-check Enables a Certificate Revocation List (CRL) check page 19-7
end Ends the current mode and moves to the EXEC mode page 19-8
exit Ends the current mode and moves to the previous mode page 19-9

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English