Motorola RF Switch CLI Reference Guide
18-16
18.1.10 domain-name
DHCP Config Commands
Sets the domain name for the network pool. Use the no domain-name command to
remove the domain name.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
domain-name <name>
Parameters
Usage Guidelines
The domain name cannot exceed 256 characters.
Example
RFSwitch(config-dhcp)#domain-name Engineering
RFSwitch(config-dhcp)#
domain-name <name> Defines the domain name for the network pool
To Next Page
Loading...
