Motorola RFS Series

RTLS Instance
21-11
Parameters
Usage Guidelines
Use [no] reference-tag rfid <tag-id> (coordinates x <0-65535> y <0-
65535>) (orientation (0|90|180|270)) range <1-150>]
to rollback the
reference-tag configuration.
Example
RFSwitch(config-rtls)#reference-tag rfid Symbol-Moto
coordinates x
600 y 600 orientation 180 range 40
RFSwitch(config-rtls)#
21.1.11 rfid
 RTLS Config Commands
Configures RFID reader parameters
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
rfid <tag-id> coordinates
x <0-65535> y <0-65535>
{[z <0-65535>]}
{orientation
[0|90|180|270]} {range
<1-50>}
Configures rfid tag as a reference tag
• coordinates – Configures tag location
• x <0-65535> – Configure X coordinate
• y <0-65535> – Configure Y coordinate
• z<0-65535> – Configure Y coordinate
• orientation – Configures reference tag orientation
(angles in degrees)
• 0 – Increments only X
• 90 – Decrements only X
• 180 – Decrements only Y
• 270 – Increments only Y
• range <1-50> – Configures tag read range in feet