Motorola RFS Series

Global Configuration Commands
5-145
5.1.51 whitelist
 Global Configuration Commands
White list is a list of host names and IP addresses that are permitted access by default.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
whitelist [clrscr|end|exit|help|no|permit|show|service]
whitelist no permit
whitelist permit [<A.B.C.D>|<Hostname>]
Parameters
NOTE: whitelist command instantiates (config-whitelist)
instance. The prompt changes from RFSwitch (config)# to RFSwitch
(config-whitelist)
clrscr Clears the display screen.
end Ends the current mode and changes to EXEC mode.
exit Ends the current mode and changes to previous mode.
help Displays the interactive help system.
no Negates a command or sets its defaults.
[<A.B.C.D>|Hostname
<suffix>]
Permits list of hostnames and IP addresses.
• <A.B.C.D> – Displays IP address
• <Hostname> suffix – Displays hostname
• suffix – Matches any hostname including this one as
suffix