Motorola RFS Series

ESPI Instance
22-3
22.1.1 adapter
 ESPI Config Commands
Enables/disables a specified adapter or all adapters
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
adapter ale-tcp [enable|port <3000-3100>]
Parameters
Usage Guidelines
Use {no} adapter <adapter> enable to disable the specified adapter
Example
RFSwitch(config-rtls-espi)#adapter ale-tcp port 3040
RFSwitch(config-rtls-espi)#
adapter ale-tcp
[enable|port <3000-
3100>]
Application side protocol implemented by adapter.
• ale-tcp – ALE over TCP Adapter
• enable – Activates/enables ESPI adapter
• port <3000-3100> – Configures ESPI adapter listening
port
NOTE: ALE-TCP is the only adapter shipped along with the switch.