Crypto-trustpoint Instance
11-13
11.1.11 rsakeypair
Trustpoint (PKI) Config Commands
Configures a RSA Keypair to associate with the trustpoint
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
rsakeypair <keypair-name>
Parameters
Usage Guidelines
The RSA key pair configures the switch to have Rivest, Shamir, and Adelman (RSA) key
pairs. Thus, the switch software can maintain a different key pair for each identity
certificate.
Example
RFSwitch(config-trustpoint)#rsakeypair were
RFSwitch(config-trustpoint)#
The rsakeypair name “were” in this example is an existing keypair value.
<keypair-name> RSA Keypair Identifier
To Next Page
Loading...
